Commit 489a1f71 authored by Michael Murtaugh's avatar Michael Murtaugh

setting up the network

parent 37801598
Connecting to TP-LINK 3020 in Recovery Mode to fix things
=========================================================
When the router is starting up, when the "WPS/Reset" button first lights up, press it and it should start blinking quickly. If so, congratulations, the device is now in openwrt's "failsafe" mode.
Connect the router to your laptop with an ethernet cable.
In order for your laptop to be able to connect to the router, you simply need to establish that they are on the same subnet of a network (since they are physically connected). This means adjusting the "Wired settings" of your laptop's network settings.
openwrt's failsafe mode assigns the device IP address 192.168.1.1
This diff is collapsed.
This source diff could not be displayed because it is too large. You can view the blob instead.
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment